Hot Sale Pulley Flywheel for Rock Jaw Crusher C96 C106 C116 in Mining Machine Spare Parts

• Customization: Available
• Certification: ISO 9001:2008
• Standard: AISI, GB, ASTM, DIN
• Model NO.: lx-800087
• Surface Treatment: Without Processing
• Manufacturing Process: Casting
• Material: Carbon Steel

Product Description

Hot Sale Pulley Flywheel for Rock Jaw Crusher C96 C106 C116 in Mining Machine Spare Parts
jaw crusher flywheel:
Commonly used nicknames: jaw crusher flywheel, jaw crusher counterweight wheel, jaw crusher balance wheel

Main material: high quality cast steel

Manufacturing process: lost mold, quartz sand sand casting, resin sand sand casting

Applicable materials: granite, limestone, marble, river pebbles and all kinds of ore, construction waste, the high compressive strength of the crushed materials is 320MPa.

Application: widely used in mining, smelting, building materials, highway, railway, water conservancy and chemical industry and many other departments, in the production line is mainly used in the primary crushing.

Product features: Support to map to sample processing or site drawing, according to the needs of customization
Stone/Rock/Mining Crusher Spare Parts Jaw/Cone/Impact/VSI Crusher Parts
Product Introduction:
Jaw crusher working principle of the motor through a belt and pulley drive the eccentric shaft rotation, the moving jaw plate around the eccentric shaft of jaw for periodic reciprocating motion, from time to time is close to the left, when the moving jaw near the fixed jaw plate in the ore between the two jaw, squeeze, bend, split and broken, when moving jaw left the fixed jaw plate, The broken ore is discharged through the discharge port of the crusher under the action of gravity.
Jaw crusher is mainly composed of frame, moving jaw assembly, transmission assembly, adjusting device, safety device and so on.
The jaw broken flywheel made by our company adopts high-quality cast steel material and advanced lost mode casting process to avoid casting defects such as large number of tiny pores and inclusions in the casting process, so as to ensure the jaw broken flywheel running at high speed and stable balance.
We provide crusher spare parts for many band of crushing plants. 





We provide replacement parts for many brands of crushing plants. like, manganese liners,cone crusher mantle and concave(bowl liner), hsi bars and liners, blow bars, side liners, jaw liners, jaw plates, teeth plates, VSI wear parts, etc, for jaw crusher, cone crusher, impact crusher, VSI sand maker, etc.

We can provide custom casting service, based on the drawings from the clients.
We will make wooden mould, and sand cast the parts, after a series processes, you will get high quality wear parts in high manganese matching your machines. 
1-Introduction of Jaw Crusher Parts
Jaw plate is manufactured with super high manganese steel, therefore it has a service life 50~100% longer than those made of traditional high manganese steel. Every model of PE series jaw crushers is tested for shock, stress, strain, thermal loading, deformation, vibration and noise under a wide range of load conditions. The special processing techniques ensure that our jaw plate has leading performance:
1)Using cold processing hardening technology, the hardness is improved.
2)Water toughening technology to avoid making the performance poor during the process of natural phase change.

2- Introduction of Cone Crusher Parts
which is designed to protect the Cone Crusher, thus improves the working life.We supply high qualified concave in high Cr, Mo, alloy steel for Cone Crusher.
Cone Crusher Parts 
1. Spare parts for Cone Crusher.
2. Be used in manganese steel
3. We can do as per customer's requirements.
We manufacture an extensive range of wear and spare parts in China for the worlds most popular crushing brands, like the spare parts for the below crushers.

Crusher type	Model	Spare parts
Cone   crusher	HP100, HP200, HP300, HP400, HP500, HP4, HP5, GP100, GP200, GP300, GP550, GP11	Bowl liner, mantle
	H2800, H3800, H4800, H6800, H7800, H8800, S2800, S3800, S4800, S6800
	4FT.Standard, 4-1/4FT.Short head , 5-1/2FT.Standard

Features of cone crusher wear parts :
1) Material: high manganese steel:Mn13Cr2, Mn18Cr2, etc;
2) Use: Machinery in metal recovery smash, mine, metallurgy, chemical industry, cement, petroleum etc.
3) Production quality testing: High frequency infrared carbon & sulfur analyzer, Metallographic microscope, Machinery performance testing equipment, Hardness testing equipment, Ultrasonic inspection equipment
4) Easy installation: The anti-abrasion block is a semi-permanent part, which is easy for replacement.
Chemical composition of cone crusher wear parts

Code Elem	C	Mn	Si	Cr	Mo	P	S
ZGMn13-1	1-1.45	11-14	0.3-1	-	-	≤0.09	≤0.04
ZGMn13-2	0.9-1.35	11-14	0.3-1	-	-	≤0.09	≤0.04
ZGMn13-3	0.9-1.35	11-14	0.3-0.8	-	-	≤0.09	≤0.04
ZGMn13-4	0.9-1.3	11-14	0.3-0.8	1.5-2	-	≤0.09	≤0.04
ZGMn13-5	0.75-1.3	11-14	0.3-1	-	0.9-1.2	≤0.09	≤0.04

3-Introduction of Impact Crusher Parts
Blow bar Made by high wear-resisting material:high chrome cast-iron and high-manganese steel.
We manufacture an extensive range of wear and spare parts in China for the worlds most popular crushing brands.
 
Chemical composition of Impact Crusher Parts

NO.	chemical composition %									HRC
	C	Si	Mn	Cr	Mo	Na	Cu	P	S
KmTBCr4Mo	2.5-3.5	0.5-1.0	0.5-1.0	3.5-4.5	0.3-0.5	-	-	≤0.15	≤0.10	≥55
KmTBCr9Ni5Si2	2.5-3.6	1.5-2.2	0.3-0.8	8.0-10.0	0-1.0	4.5-6.5	4.5-6.5	-	-	≥58
KmTBCr15Mo	2.8-3.5	≤1.0	0.5-1.0	13-18	0.5-3.0	0-1.0	0-1.0	≤0.10	≤0.06	≥58
KmTBCr20Mo	2.0-3.3	≤1.2	≤2.0	18-23	≤3.0	≤2.5	≤1.2	-	-	≥60
KmTBCr26	2.3-3.3	≤1.2	≤1.0	23-30	≤3.0	≤2.5	≤2.0	-	-	≥60

Crusher Wear Parts