Single cylinder - crushing round:
Commonly used nicknames: rolling mortar wall, crushing wall, moving cone lining plate, fixed cone lining plate, cone breaking accessories, cone crusher accessories.
Main material: high manganese steel, manganese chromium alloy (Mn13, Mn13Cr2, Mn18, Mn18Cr2).
Manufacturing process: V method, die, water glass sand casting.
Applicable materials: pebble, granite, basalt, iron ore, limestone, quartz, diabase, iron ore, gold ore, copper ore, etc.
Application: sand and stone material yard, concrete mixing station, dry mortar, power plant desulfurization, quartz sand, etc.
Product features: Support to map to sample processing or site drawing, according to the needs of customization
Product Introduction:
The structure of cone crusher is mainly composed of frame, horizontal axis, dynamic cone, balance wheel, eccentric sleeve, broken wall (fixed cone), broken wall (dynamic cone), hydraulic coupling, lubrication system, hydraulic system, control system and so on.
Cone crusher work, the surface of the broken wall sometimes close to and sometimes leave the surface of the mortar wall, so that the material in the upper and lower broken wall of the annular crushing chamber continuously received extrusion, impact and bending and broken.
Characteristics of accessories
1, high performance through cavity optimization design and the use of reasonable speed and stroke combined, so that the model in the same moving cone diameter under the condition of doing more work. Therefore, compared with the same type of cone crusher, it has higher performance and production capacity.
2, the product particle size composition is good using the principle of lamination crushing, so that the proportion of the cube in the product is increased, the needle-like stone is reduced, and the grain size is more uniform.
3, good stability when there is iron and other non-broken objects into the machine, the iron protection device will automatically release it, and then automatically reset. The over-iron protection has a fixed discharge port return point, the miscellaneous iron through the crushing chamber, can quickly restore the original discharge port.
4. Convenient cavity cleaning if the crusher is shut down under load, the hydraulic cavity cleaning system can quickly clean the broken cavity, greatly reducing the downtime.
5, high reliability all parts can be removed from the upper or side, so that the fixed cone and moving cone assembly can be easily removed.
6, low production cost due to large production capacity, high reliability, convenient maintenance, greatly reduce the production cost.
Manganese 13 (Mn13) mortar wall is crushed
Mn13 has high tensile strength, plasticity, toughness and non-magnetism, even if the parts wear to very thin, still can withstand a large impact load without breaking, can be used for casting a variety of impact wear parts.
Manganese 13 Chromium 2 (Mn13Cr2) mortar wall crushing wall
Using Mn13Cr2 material, that is, while reducing the content of C and Mn of traditional high manganese steel, adding Cr element, makes up for the deficiency of toughness of traditional high manganese steel, and effectively extends the service life of wear-resistant parts.
Manganese 18 (Mn18) mortar wall was crushed
Especially the standard Mn18 high manganese steel rolled mortar wall, high manganese and carbon content; The as-cast structure of the steel consists of austenite and carbides. After water toughening at 1050ºC, most carbides are solidly dissolved in austenite.
Contact us today and we will deliver an accurate casting quote within 2 working days!
Jaw crusher wear parts. There are two jaw plate in one jaw crusher. One called fixed jaw, the other called swing jaw. They work together to make the stones get into small pieces.
Material: High Manganese--
Mn20Cr3
Mn18Cr2
Mn13Cr2
Mn13
...
MOQ:1 piece
delivery package steel pallet
Production technology: casting & water quenching & machining
Surface process: shot blasting & painting & oil
Size: according customer's drawing or model no.